Bergman Article 2014
N. Sharifi, T.L. Bergman, M.J. Allen, A. Faghri, “Melting and solidification enhancement using a combined heat pipe, foil approach,” International Journal of Heat and Mass Transfer, vol. 78, pp. 930 – 941, 2014.
Melting and solidification of a phase change material (PCM) is investigated, experimentally and computationally, using a novel heat pipe–metal foil approach. By embedding a PCM within a metal foil matrix, and delivering (or extracting) thermal energy to (or from) the matrix with a vertically-oriented heat pipe, overall thermal resistances between a working fluid and the PCM solid–liquid interface can be reduced. This leads to increased phase change rates relative to configurations involving only the heat pipe, or only a solid rod of the same physical dimensions as the heat pipe. For a small (approximately 1%) volume fraction of foil in the PCM–foil matrix, measured and predicted melting (solidification) rates associated with heat pipe–foil configurations are increased by approximately 300% (900%) relative to configurations involving the rod with no foil. Melting and solidification rates relative to configurations involving the heat pipe with no foil, are increased by approximately 200% and 600%.