Simpson, T. and Depcik, C. (2022).  Multiple Fuel Infection Strategies for Compression Ignition Engines. Energies, 15, 5214.

Abstract

Until the early 1990s, the predominant method of fuel delivery for compression ignition engines was the mechanical pump-line-nozzle system. These systems typically consisted of a cam-driven pump that would send pressurized fuel to the fuel injectors where injection timing was fixed according to the pressure needed to overcome the spring pressure of the injector needle. These configurations were robust; however, they were limited to a single fuel injection event per thermodynamic cycle and respectively low injection pressures of 200–300 bar. Due to their limited flexibility, a poorly mixed and highly stratified air fuel mixture would result in and produce elevated levels of both nitrogen oxides and particulate matter. The onset of stringent emissions standards caused the advancement of fuel injection technology and eventually led to the proliferation of high-pressure common rail electronic fuel injection systems. This system brought about two major advantages, the first being operation at fuel pressures up to 2500 bar. This allowed better atomization and fuel spray penetration that improves mixing and the degree of charge homogenization of the air fuel mixture. The second is that the electronic fuel injector allows for flexible and precise injection timing and quantity while allowing for multiple fuel injection events per thermodynamic cycle. To supply guidance in this area, this effort reviews the experimental history of multiple fuel injection strategies involving both diesel and biodiesel fuels through 2019. Summaries are supplied for each fuel highlighting literature consensus on the mechanisms that influence noise, performance, and emissions based on timing, amount, and type of fuel injected during multiple fuel injection strategies.